The content of this publication is subject to copyright of JSC TD ENERPRED and cannot be reproduced (even in part) without appropriate permission. JSC TD "ENERPRED" reserves the right to make any changes to the design and characteristics of the tool offered in this catalog without prior notice. Instrument specifications, including weight, dimensions and other parameters, may vary slightly.
| Model | Nominal pressure,, MPa (kgf / cm3) | Working volume of hydraulic fluid,, cm3 | Angle of rotation of the handle of the hydraulic distributor, ° | Volume for filling cavities,, cm3 | Weight, no more,, kg | Pumping station | |
| KRUG-2VS | 70 (714) | 200 | ±45 | 175 | 6,4 | NBR-1,2A8-1 |
| Model |
| KRUG-2VS |
| Nominal pressure,, MPa (kgf / cm3) |
| Working volume of hydraulic fluid,, cm3 |
| Angle of rotation of the handle of the hydraulic distributor, ° |
| Volume for filling cavities,, cm3 |
| Weight, no more,, kg |
| Pumping station |
| KRUG-2VS | Nominal pressure,, MPa (kgf / cm3) | Working volume of hydraulic fluid,, cm3 | Angle of rotation of the handle of the hydraulic distributor, ° | Volume for filling cavities,, cm3 | Weight, no more,, kg | Pumping station | |
| 70 (714) | 200 | ±45 | 175 | 6,4 | NBR-1,2A8-1 |
Power module Circle-2VS
| Parameter | Value |
| Nominal pressure, MPa (kgf / cm²) | 70 (714) |
| Working fluid |
MGE-10A OST 38 01281-82
AMG-10 GOST 6794-75 |
| Working volume of hydraulic fluid, cm3 | 200 |
| Angle of rotation of the handle of the hydraulic distributor | ±45° |
| Volume for filling cavities, cm3 | 175 |
| Overall dimensions (BxLxH), mm | 107x333x187 |
| Weight, no more, kg | 6,4 |
| Recommended pump station | NBR-1.2A8-1 |
Combined nozzle R-300
| Parameter | Value |
| Nominal cutting force, tf | 29 |
| Effort at the ends of levers when extending, not less, tf | 3,2 |
| Effort at the ends of the levers in compression, not less, tf | 5,2 |
| Levers opening value, no more, mm | 300±5 |
| Cut bar diameter, mm | 22 |
| Hardness of the cut bar, max, NV | 200 |
| Overall dimensions (BxLxH), mm | 107×413×199 |
| Weight, no more, kg | 7,5 |
Scissor attachment Н-20
| Parameter | Value |
| Nominal cutting force, tf | 29 |
| Opening value of knives, no more, mm | 150±5 |
| Cut pipe diameter, mm | 33 |
| Overall dimensions (BxLxH), mm | 107х334х184 |
| Weight, no more, kg | 6,3 |
Pumping station - NBR-KRUG2
Parameter |
Value |
Nominal pressure, MPa (kgf/cm2) |
70 (700) |
Engine power, kW |
1,8 |
Pump capacity at Rvh=16 MPa, l/min |
2,4 |
Productivity at Ph, l/min |
1,2 |
The volume of the working fluid tank, l, not less | 1,5 |
Overall dimensions (BxLxH), mm |
375x420x324 |
Weight, not more than, kg |
18 |
Single-row extension coil COOK-1 (3, 5, 10 meters) For NBR-KRUG2 station
Parameter |
Value |
Length of one sleeve (hose), m |
15 |
Number of hoses (hoses) wound on one drum: |
|
Pressure, pcs |
1 |
Power, pcs |
1 |
Weight of the product filled with working fluid (15 m), kg | 15 |
Overall dimensions (BxLxH), mm |
420x320x500 |
The set is designed for conducting rescue and assembly and dismantling works
- Lightweight and mobile KRUG-2VS allows you to carry out various work with the efforts of one person
- The minimum preparation time of the tool for work is ensured by a bayonet-type connection (installation and replacement of attachments takes 3 seconds)
- 2 replaceable nozzles can be installed in four different positions relative to the axis of the power module, which provides convenience in any situation
- KRUG-2VS operates from a pumping station with diesel / gasoline / electric / pneumatic or manual drive, which makes it universal
The kit includes
We have much to be proud of, because of our
partners leading companies in Russia and Eastern Europe:
If you have any questions, contact us and we will respond to them
Contact the managerWe invite you to mutually beneficial cooperation for the promotion of the tool marks "Enerpred" in all regions of our country and abroad.
Send requestWe offer you to download our product catalog in PDF format
Download